3 methods to increase the effects in use of slewing bearing
3 methods to increase the effects in use of slewing bearing
In the current mechanical and equipment, the slewing bearing has played a pivotal role. Because of its importance and commonality, the turntable bearing is also very easy to wear. In order to better use the bearings, we introduce 3 methods to use the slewing bearing.
First, during the use of the machine, we should timely add lubricating oil for the bearings, because the excessive operation of the bearings can easily lead to a large amount of wear problems. Fiction damage.
Second, the slewing bearing is a component with a higher reimbursement rate in the entire machine, so when we buy the corresponding machine, we should pay attention to adding a few more backup parts when buying the bearings, and the materials for the spare bearing must be selected well. The alloy, otherwise the bearings will be eliminated after a long time, or the performance of the machine cannot be volatile.
3. Every month, the machine should be cleaned up. At this time, do pay attention to the removal of the bearing to clean up. The large amount of oil or other dirt in the bearings will affect the slewing bearing working efficiency.
In addition, it should be noted that after a hundred hours of running for the turntable bearing, the bolt should be checked for a pre -tightening force. After every 5 hundred hours of operation, it must be checked every 500 hours. During the use of water, flush the turntable bearing with water to prevent water from entering the roller, and strictly prevent the rigid foreign objects approaching or entering the tooth -weed area. Regularly check the intact situation of the sealing. If the sealing ring is found to be damaged, it should be replaced in time, and it should be reset in time. During the use process, you should add lubricating fat regularly. Generally, the ball -based turntable bearings should be refueling every 100 hours, and the roller turntable bearing is refueling every fifty hours. The special working environment, such as high temperature, high humidity, more dust When the temperature changes and continue to work, the lubrication cycle should be shortened. When injection of oil, you should slowly rotate the rotor bearing to fill the grease evenly. For turntable bearings with inner or external teeth, you should often remove debris and apply the corresponding lubricating fat.
Through these methods, not only can we play the role of the rotor bearing in the machine more, but also increase the service life of the machinery and equipment to better serve us.
