How to prevent the influence of moisture on bearings?
1. Waterproofing during transportation
If you want to reduce the influence of moisture on turntable bearings, you should work hard during transportation. First of all, the seal should be intact. Before transportation, you should think about the most possible situations and take protective measures. For example, common weather changes - rain. Rainwater contains some acidic substances, which will more easily cause bearing corrosion, so you must do a good job of sealing to minimize bearing corrosion.
2. Waterproofing during use
(1) Attention to the use environment: When using, pay attention to the working environment of the bearing and try not to have moisture. Sometimes moisture is not only liquid moisture, but also water vapor. These may become the cause of bearing rust, so you must avoid all possible contact with water.
(2) Wipe away moisture in time: During use, there may be some factors that we cannot control, such as a sudden water leak in the factory workshop, and there is no time to deal with it, and moisture drips on the bearing. At this time, in addition to taking some emergency covering measures, you must also wipe away the moisture on the bearing in time to try to reduce the damage caused by moisture to the bearing to a relatively low level.
3. Waterproofing during storage
During storage, we must first pay attention to the fact that we cannot be around the bearings all the time, so the bearings will not be affected by moisture in a timely manner. Therefore, it is recommended that you do the waterproofing work in advance. In addition to paying attention to the sealing protection of the bearing itself, you must also pay attention to whether there are leaks and water seepage in the warehouse. If there are any, remedial measures should be taken in time.
