What are the repair methods for table turntable bearings?
The dining table has been an indispensable thing for people since ancient times. From the stone tables of primitive people, to later wooden tables, and now iron tables, etc., tables are constantly changing. Nowadays, turntable dining tables are common in hotels. Glass turntables are often used during banquets, and the core component is the bearing. However, sometimes we encounter some stuck or inflexible situations, so how should we solve this situation?
1. Maintenance method of dining table turntable bearings
1) If you find that the table turntable is stuck or inflexible, you must first check whether the bearing is still intact. Damage to the bearing will cause the turntable to become unable to rotate. This situation can also be easily solved. Find a nearby one. From a store that sells bearings, just buy a dining table turntable bearing. The price is not very high and is completely acceptable.
2) When the table turntable needs repair, it is common for the bearing to rust. Because it is mainly used in the catering industry, sometimes it will inevitably be corroded by the soup and become rusty. In this case, it is necessary to find a way to remove the rusty area. Rust can be removed by grinding or using chemical agents.
3) If the table turntable only makes noise and is difficult to rotate, it is most likely caused by insufficient lubrication. Insufficient lubrication causes difficulty in the bearing rotation. This is also easy to solve. Just add lubricating oil to the table turntable bearing. After dripping, Turn it a few times to get it back to smoothness.
2. Maintenance of table turntable bearings
In order to avoid unexpected situations during the use of the turntable bearings, attention should be paid to their daily maintenance. First of all, when choosing to buy a dining table turntable, do not be greedy for cheap and choose poor quality, because the lower price will definitely affect the quality of the bearing. It is not good or there are no bearings at all. Secondly, rust is often caused by the contact between iron and water or corrosive liquids. Therefore, during use, care should be taken to avoid direct contact of water with the bearings, causing unnecessary trouble.
The above is an introduction to the maintenance methods of dining table turntable bearings. Bearings are not only used on dining tables, but also in all aspects of life. Bearings are needed wherever rotation is required. Some large mechanical equipment requires large turntable bearings. Compared with ordinary bearings, slewable bearings are only larger in size, but their precision, accuracy and applicability have not changed much. If you need to purchase large slewable bearings, you can contact Hengguan in time.
