What are the rules for using slewing bearings?
The structure of the slewing bearing can maintain the stability of the movement. The slewing bearing is made of oil-resistant rubber, fluorine-containing rubber, and oil-resistant nitrile rubber. The product is delivered to the owner's site with guaranteed quality on schedule. Because the actual operating conditions are heavy-bearing, it is subject to overturning forces in an instant. The distance is large, and the original externally toothed four-point ball slewing bearing has its own standard limitations and structural characteristics.The above-mentioned types of bearings are divided into toothless types according to whether they are toothed and where the gears are distributed. Through careful calculation and planning by our technical engineers, the original four-point ball structure was cleverly changed into a three-row roller structure. The load-bearing capacity and service life of the bearings are greatly enhanced. The owners of this set of products were very worried about equipment problems in the early stage.
Through repeated communications between our technical engineers and the owner's technical staff, we finally won the trust of our customers with our professional technology and sincere service. We have different structures such as external tooth type and internal tooth type. The slew plate bearing rings are surface-hardened. Hard steel, turntable bearing equipment: Place the inner ring and outer ring correctly. First, place the outer ring flat on the workbench, put in the lower half ring and try to make the outer ring raceway correspond to the inner ring raceway. Place the raceway correctly. Special ball or roller isolation blocks are required for special applications.
