slewing ring

Three-row roller slewing bearing has three seat rings, the upper and lower raceways and the radial raceways are separated. The upper and lower rows of rollers are arranged horizontally, and the middle row of rollers is arranged vertically. It can be made into an inner gear ring or an outer gear ring according to the equipment structure and work needs. The axial force and tilting moment in the two directions are borne by the upper and lower horizontal rollers, and the radial force is borne by the vertically arranged third row of rollers. According to the different characteristics of the load, the upper and lower rows of rollers can be of the same diameter or of different diameters. So that the load of each row of roller can be determined accurately. Being able to bear all kinds of loads at the same time, it is the largest one of the four structural products with large axial and radial dimensions and firm structure. It is especially suitable for heavy machinery requiring larger diameter, such as bucket wheel stacker and declaimer, wheel crane, marine crane, port crane, ladle turret and large tonnage truck crane, heavy machinery and so on.

In amusement equipment, slewing bearings are used in Ferris wheels, large pendulums, and flying chairs. Broadly speaking, a slewing bearing is a large bearing that can withstand comprehensive loads, and can bear large axial, radial loads and overturning moments at the same time. Slewing bearings generally have mounting holes, internal gears or external gears, lubricating oil holes and sealing devices, so that the design of the main engine can be compact, easy to guide, and easy to maintain. Ferris wheel usually adopts double row ball slewing bearing. There are two rows of rolling elements, which can bear large axial load, radial load and tilting moment. It rotates flexibly and stably with higher safety factor. For some large ferris wheel, four contact ball slewing bearing is selected too, outer dia is about 4100mm, depth 85mm. Slewing ring bearings used on Ferris/Sky wheels are used with inner rings. In most cases, the bearing should be light enough and safe enough to rotate. The slewing ring bearings used on the Ferris wheel/sky wheel generally require a long service time, so it is also very important for anti-corrosion. If non-standard customization is required, our company can provide technical support such as selection, design, calculation, etc.

Single row four point contact ball slewing ring Q series is a standard model series in China. Q means single row ball type. QW is external gear type, QN is internal gear type, QU is non gear type. It is made of two seat rings. The balls and the raceway are with four points contact, via which the axial force, radial force and resultant moment is born simultaneously. Outer Diameter is from 360 mm to 4700mm. Standard material we adopt is 50Mn and 42CrMo. Other customized material is also acceptable. We support models selection based on your application; teeth quenching and grinding; customized surface treatment like Blackening, phosphating, galvanizing, sandblasting and etc. In the production process of slewing ring bearing, whole process inspection is implemented strictly to ensure that each set of products are qualified. For high-precision products, precise grinding is used to effectively control the parameters of ring ellipse, wall thickness and flatness, so as to ensure that the precision of finished products meets the requirements of standards or customer drawings. This series models are with advantage of compact design, flexible rotating and light weight. It is widely used on rotary conveyor, welding arm and positioner, light/medium duty cranes, excavators and other engineering machines. Please feel free to tell us the application you use and we can help you choose the proper model and offer you a professional solution as soon as possible.

Slew Bearing For CT Scanner Machine is featured with high precision, high speed and low noise. Firstly, the 42CrMo quenched and tempered material is used to make the material performance better and more stable, which guarantees the product quality from the source; Secondly, the product raceway and appearance are comprehensively polished to ensure high product precision; Thirdly, for the product's silent requirements, a special segmented nylon cage device is used to lock the ball in the cage pocket while ensuring that the steel ball can rotate freely, thereby reducing the noise impact caused by the free movement of the cage in the raceway. Reduce rotating noise. Through the above efforts, we ensure that the finished products of the slewing ring meet various technical requirements.

The wind turbine yaw bearing is installed at the connection between the tower and the cockpit, and the pitch bearing is installed at the connection between the root of each blade and the hub. Each wind turbine uses one set of yaw bearing and three sets of pitch bearing. The material of the yaw and pitch bearing rings is 42CrMo, the heat treatment adopts the overall quenching and tempering treatment, and the surface of the raceway is quenched. The force of yaw and pitch bearings is complex, and the impact and vibration are relatively large. Therefore, the bearing is required to withstand both impact and large load. The life of the wind turbine main engine requires 20 years, and the cost of bearing installation is relatively large, so the life of the yaw and pitch bearings is required to reach 20 years. The hardness of the bearing ring base is 240-280HB, which can withstand impact without plastic deformation. At the same time, the surface quenching hardness of the raceway reaches 55-62HRC, which can increase the contact fatigue life and ensure the service life of the bearing.

Palletizing robot require flexible operation, accurate point position, light and fast, so they are generally used in light and precision slewing bearings. Our company has a professional production line of this kind of product, specializing in the production of such high-precision rotary bearing, which is one of our company’s main product series. Small slewing bearing, as a key accessory of industrial robot, is an indispensable part of it. At present, from the perspective of the development trend of robots, modern robots are developing in the direction of lighter weight, precision and intelligence, which requires the supporting slewing bearing to have a lighter structure and more advanced manufacturing and assembly processes. Usually, The installation space of the industrial robot slewing bearing is very limited, and the slewing bearing must meet the performance requirements of the robot host for the bearing capacity, stiffness, precision and friction torque of the slewing bearing in the limited installation space. It is difficult to meet this requirement by selecting standard slewing bearings, and light slewing bearings can solve this problem well. This kind of slewing bearing has the characteristics of small diameter and large number of steel balls, and can bear radial load, bidirectional axial load and overturning moment.

Excavator is one of the important equipment in modern engineering construction. The reason why the excavator can turn left and right in the work is because of the slewing mechanism, which is one of the important components of the hydraulic excavator. The slewing mechanism is connected with the traveling device through a slewing bearing, and the slewing drive device makes the platform rotate relative to the traveling device, and drives the working device to rotate around its central axis of rotation. We are specialized in the production of engineering machinery slewing bearings, drive shafts and matched pinions. For some common model excavators slewing bearing, we have ready stock and can deliver within one week. Our company has a special quality testing laboratory, devoted to product design and development, product application and testing methods. At the same time, the company also has advanced production equipment and testing equipment to ensure that products have high performance, long life, low friction, high precision.

Excavator is one of the important equipment in modern engineering construction. The reason why the excavator can turn left and right in the work is because of the slewing mechanism, which is one of the important components of the hydraulic excavator. The slewing mechanism is connected with the traveling device through a slewing bearing, and the slewing drive device makes the platform rotate relative to the traveling device, and drives the working device to rotate around its central axis of rotation. We are specialized in the production of engineering machinery slewing bearings, drive shafts and matched pinions. For some common model excavators slewing bearing, we have ready stock and can deliver within one week. Our company has a special quality testing laboratory, devoted to product design and development, product application and testing methods. At the same time, the company also has advanced production equipment and testing equipment to ensure that products have high performance, long life, low friction, high precision.