Tips for daily maintenance of slewing bearings
🧐1. Regular cleaning: Keeping the slewing bearing clean is the primary task of maintenance. Regularly remove dirt and oil from the surface of the bearing to avoid dust and oil accumulation affecting its normal operation. Use appropriate cleaning agents and tools to ensure that the cleaning process does not cause damage to the bearing.
💚 2. Lubrication and maintenance: Lubrication is a key measure to reduce bearing wear and friction. According to the requirements of the equipment manual, select appropriate grease for lubrication, and ensure that the amount and frequency of grease filling are correct. Regularly check the quality and use of grease, and replace and replenish it in time to ensure that the bearing is fully lubricated.
💥 3. Check fasteners: The fasteners on the slewing bearing, such as bolts, nuts, etc., need to be checked regularly for their tightening status. Ensure that these fasteners are in a tightened state to avoid loosening or falling to ensure the stable operation of the bearing.
💟 4. Check the seals: The integrity of the seals is crucial to prevent dust, moisture and other external substances from entering the bearing. Check the condition of the seals regularly to ensure that they are intact and effective. If they are damaged or fall off, they should be replaced or reset in time.
💙 5. Check for damage and wear: Regularly check the tracks, gears and other parts of the bearings for wear or damage. For worn or damaged parts found, they should be repaired or replaced in time to avoid the expansion of faults and affect the normal operation of the equipment.
🤙 6. Regular inspection: In addition to the above daily maintenance measures, the slewing bearings should also be inspected regularly. This includes checking the operation of the bearings, abnormal conditions such as abnormal noises and jamming, and checking the looseness of the bearings. For any problems found, repair measures should be taken in time to ensure the normal operation of the bearings.
